Jiangsu Yunneng Precision Technology Co., Ltd
Innovative materials, energy-efficient production, and intelligent manufacturing.
Add to Cart
Aluminum Plate 1060 D26 Power Plant Water Cooling Tower Aluminum Coil
Product Description:
We Supply 1 series pure aluminum and 3003 series anticorrosive aluminum tubes. Our company can produce air-cooled island tubes (aluminum heat exchanger tubes) with outer diameter of 15mm ~ 30mm, wall thickness of 0.8 mm ~ 2.0 mm and length of 3M ~ 15m. Can also be customized according to customer needs of non-standard specifications of the heat exchange equipment aluminum tube.
The product is made of 1 series of aluminum alloys. The final state of the product is: straight tube.
We passivate and anticorrosion the inner and outer surfaces of aluminum tube, and add anticorrosive coating on the inner and outer surfaces, which is suitable for the use of large heat exchanger.
Our company is committed to a variety of aluminum-based new materials research and development, production, application, widely used in refrigeration, heating and new energy and other fields. At the same time I can also be customized according to customer requirements of different specifications of products.
Features:
This product uses a special anti-corrosion alloy, in the inner and outer surface of the anti-corrosion coating. Compared with the common aluminum alloy, the corrosion-resistant effect is obviously improved, the corrosion-resistant test time can reach more than 1000 hours, and the service life of the product is greatly increased.
We use high quality remelted aluminum bars, control quality from raw materials, use large-tonnage extruder, hot extrusion cold drawing mode of production, product density, high heat transfer performance, high corrosion resistance, tolerance range is small.
Applications:
Power plant water cooling tower
surface condenser
Large heat exchange equipment
condensator
evaporimeter
etc.
Technical Parameters:
Aluminum Coil Tubing
| (Main Size) | State | Outside Diameter /mm | Wall Thickness /mm | Length /m | Tensile Strength /MPa | Non-proportional Elongation Strength /MPa | Elongation After Break A50/mm | ||
| Model Number | |||||||||
| Main Size | |||||||||
| Series 1 | 1050 1060 1070 1050A | O | 20-32 | 0.8-2.0 | 5-15 | ≤20.00 | 60~95 | ≥70 | ≥25.00 |
| H14 | ≤10.00 | 100~135 | ≥70 | ≥5.00 | |||||
| Series 3 | 3003 3103 3A21 | O | ≤20.00 | 95~130 | ≥35 | ≥25.00 | |||
| H12 | ≤15.00 | 115~150 | ≥75 | ≥12.00 | |||||
| H14,H24 | ≤10.00 | 135~165 | ≥110 | ≥6.00 | |||||
| H28 | ≤3.00 | ≥180 | ≥145 | ≥3.00 | |||||
Support and Services:
We can provide technical support and services for the use of aluminum pipes, including technical guidance, production assistance, etc. Our experienced technicians can assist you with any problems your product may encounter. We also provide regular after-sales service to ensure that your products are always run at the highest efficiency. We are proud of our work and strive to provide the best customer service.
If you have any questions or concerns about the product or your use, please feel free to contact us. We will always give you the answers you need.
Q1: What kind of material alloy is the product?
A1: At present, it can produce 1 series industrial aluminum alloy, 3003 and 3103 aluminum manganese alloy, and 6 series aluminum alloy.
Q2: What state and performance of the aluminum pipe can be produced?
A2: can produce from hard state to soft state and interval performance products
Q3: Can I customize the product specifications and requirements?
A3: Different materials and products with different requirements can be customized according to the requirements
Q 4: What is the minimum starting order volume?
A 4: The minimum order volume is 3 tons.