Jiangsu Yunneng Precision Technology Co., Ltd
Innovative materials, energy-efficient production, and intelligent manufacturing.
Add to Cart
| (Main Size)
Model Number | State | Outside Diameter /mm | Wall Thickness /mm | Length /m | Tensile Strength /MPa | Non-proportional Elongation Strength /MPa | Elongation After Break A50/mm | ||
| Main Size | |||||||||
| Series 1 | 1050 1060 1070 1050A | O | 20-32
| 0.8-2.0 |
5-15 | ≤20.00 | 60~95 | ≥70 | ≥25.00 |
| H14 | ≤10.00 | 100~135 | ≥70 | ≥5.00 | |||||
| Series 3 | 3003 3103 3A21 | O | ≤20.00 | 95~130 | ≥35 | ≥25.00 | |||
| H12 | ≤15.00 | 115~150 | ≥75 | ≥12.00 | |||||
| H14,H24 | ≤10.00 | 135~165 | ≥110 | ≥6.00 | |||||
| H28 | ≤3.00 | ≥180 | ≥145 | ≥3.00 | |||||
Product Description:
Air-cooled Island Tube Production Process
Raw Material Purchase - Inspection - Cleaning - Extrusion - Joint Drawing - Straightening - Precision Cutting - Inspection -Finished product packaging
The air-cooled island tube is suitable for large-scale production of high-precision, high-strength, good plasticity, and large-diameter thin-walled high-end aluminum alloy pipes through indirect mass production. It is extruded using a large-tonnage extrusion press, resulting in higher density and better control of product accuracy than cold drawing and stretching processes. The monthly production capacity is 300 tons.
Can mass produce high precision, high strength, good plasticity, large diameter, thin-walled high-end aluminum alloy tubes and pipes, the use of large-tonnage extruder extrusion, higher product density, cold drawing process, better control of product precision. Monthly output 300 tons.
Use the special anticorrosive alloy, and add the anticorrosive coating on the internal and external surface. Compared with ordinary aluminum alloy, the corrosion resistance effect is greatly improved, and the corrosion resistance experiment is> 1000 hours, which can greatly improve the service life of the product. Using a special production process, the product has a high density and high efficient heat transfer performance. From the raw material to control the quality, the use of large tonnage extruder, hot extrusion cold pull production mode, can produce a variety of state performance. The product has high density, high heat transfer performance, high corrosion resistance , small tolerance range and better quality.
1050
|
Model Name |
Model Number | Outside Diameter /mm |
Wall Thickness/mm | Maximum Length/m | Length/mm | Tensile Strength /MPa | Non- proportional Elongation Strength /MPa | Elongation After Break A50/mm |
| Main Size | Series 1, Series 3 | 20-32 | 0.8-2.0 | 5000-15000 | ||||
| Example | 1050 | 35 | 1.8 | 18 | 9000 | 100~135
| ≥80 | ≥5.00 |
| 21 | 1.0 | 7000 | ||||||
| 31 | 1.5 | 6000 | ||||||
| 32 | 1.9 | 8000 |
Large peak cooler
surface condenser
Large heat exchange equipment
condensator
evaporimeter
etc.
Indirect Dry Cooling System(Surface-type steam condenser) has been used for various applications in the power industry for many years. It is particularly well suited for large power stations.
The advantages of IDCT is:
Elimination of water usage from the condensing power cycle:
Flexible in power station site selection
No necessary of fans, reducing the power dissipation.
Less noise, better running environment.
The technical support and services for Air-conditioner and refrigerator tubes include: